A question on System One.

Model Railroader Electronics and DCC
1

Does anyone know if there is a factory reset for the System One command station and/or throttles?

Thank in advance.

2

I believe North Coast Engineering took over the Wangrow System One product line, so you might try contacting them with your question.

http://www.ncedcc.com/

3

Thanks cacole, I also asked on the NCE Yahoo Group hope to have a reply. If not I will try NCE as you suggested.

4

I was looking around the web for information on a Wangrow accessory decoder and happened upon a site that has what appears to be the latest or possibly last version of the Wangrom system manual. It is about 270 pages. I didn’t look through the whole thing, but I suspect that it has the information you are searching for. There is a section called “set command station” on page 4-24. Maybe that will help you out.

The site is:

http://www.allpointsnorthmrrc.org/files/tech/Wangrow%20SystemOne%20Operation%20Manual%20%20SYS1MAN9%201999-08-11.pdf.

Good luck.

5

Thanks for the link Maxman, I was able to reset the system to factory default and now everything is Ok.

Jack W.