Hope you don’t mind but I’m just thinking “out loud” how times change. For those of you that are not aware, Athearn is not producing the FP45, F45, and the U33B “Blue Box” locomotives currently. BTW----this is not an Anti- Athearn thread. Recently I was quite surprised when a fellow modeler I’ve known a few years jokingly “sneered” at me over the phone saying “Aw come on! Why would you want “those things”? [oX)]The color’s off, the U-Boat’s hood is too wide…Decals are too slanted, Blah-Blah, Yada-Yada-Yada”……What a tirade! [:0][B)][:0][:(!] I would have never expected this from him. My mouth hung open, but I kept my cool. [8D][:-^]
HIndsight: I should have said to this guy, who’s 38 years old, “Dude, You need to remember where we came from and what it was like when we were the young modelers that couldn’t even afford the Blue Boxes and dreamed of owning them!!”
From the 70s to the early 90s, these units he was “ripping on” were “The Bomb!” There are literally “Hundreds” of pictures in MRR and RMC magazines of the past showing these and other Blue Box Athearn locomotives beautifully modifed mechanically and detail wise! The 1998 Walther’s Catalog has several pages in the “photo” section showing modelers running sleek Santa Fe FP45s pulling hot shot freights!
Today, sad to say, many modelers that are even my age are quite spoiled! I’ve stated before that I won’t buy any more Athearns except for some specific ones-------the units mentioned above which, of course, are no longer being made! I’ve had to eat humble pie!
Just felt it was noteworthy because while I’ve been buying P2K locomotives, Athearn is still the only manufacturer that makes “Decent” versions of the locomotives I mentioned and I found myself wan
Antonio, it’s been a long time since I’ve paid real close attention to Athearn. I used to work in hobby stores many years ago, and back then I was very up on how they operated because it was part of my job. What I noticed was that products came out in spurts. It was like you couldn’t get a caboose to save your life, they ware on backorder forever. Then suddenly 10 cases would show up. Locomotives were just as fickel.
Part of that had to do with the production schedule. They only have so many molds and so many machines to run them on. Then there was painting to schedule too. It’s got to be a real juggling act to produce everything, when you have so many different items in the catalog.
Unless the molds are absolutely worn out, which can happen, it is very likely that the engines in question will come back sometime in the future.
This is a time of transition. First the buy out by Horizon, then the movement of production, then the consolidation with the Roundhouse line, and possible distribution changes. That’s a lot to digest!!! Things will settle down, and when they do, I suspect you will see all of the great products that Athearn has become famous for, and probably many new ones as well, over time of course.
Keep in mind that new prototypes come out, and new molds are made, some things may have to be dropped to make room in the production schedule. The model business can be kind of strange that way, because the real ones have been scrapped, modelers like to model all different time periods. Some things never die.[swg]
He went to Generic plastic moulds painted in indifferent schemes: If you wanted a AT&SF caboose in C&O paint he had it. He pioneered the rubber band drive, modified product dimensions to standardized on parts (one part fits all), and dominated the ‘toy train’ HO market for decades because of low prices. Hooray!
He also rarely had R.O.I., slept in his office many night’s, continually painted his stuff in violation of EPI, and saved money by not booking in trade shows. What a Guy!
I (like everyone else) bought his products because he was a major factor in the HO market, but to me he was not a major hero. To me, a major hero is someone like Intermountain, that upgraded the hobby and raised the bar for others, with superior rolling, detail, and paint jobs - and yes, also breaking the price barrier.
Do I buy all $30 cars now? No. But they let me know what I was missing.
Athearn cars are still readily available at 'Swap Meet’s for $1 -$5.
Athearn develop a drive in that is still in use today by every major manufacturer.
Even though this drive has been improved by other companies including Kato.Of course Athearn bashers will never admit todays smooth running drives design was first design and made by Athearn…The old Atlas locomotives didn’t look any better then Athearn’s.Life Like was a toy.What’s a Kato? A Japanese company that made trains for their domestic market.
No athearn hasn’t done anything to help the hobby along in the days of wooden and metal car kits…Atlas made track and imported N scale.Brass diesel locomotives was worst then Athearn locomotives.You want coffee grinders? Buy the old brass of the 50s and 60s.Funny how many claim to be long time hobbyist forget things wasn’t anything like today…Old timers disease I suppose?? Faded memories?? Or wasn’t around in the bad old days even though they claimed to have been?
Guys,let me tell you straight up…We are spoiled rotten today.How many of todays hot shot modelers can build a Penn-Line,Hobbytown of Boston or Varney locomotive kit?? Shoot,some stumble,trip and fall building a simple Athearn car kit…Some whiners apparently can’t even add a simple aftermarket detail part or else they wouldn’t waste time whining about a locomotive missing a simple detail part on some forum and then dare call their selves modelers and self proclaim experts and look down on others.[}:)]
No,the old days was harsh,lean and mean.You had to have many skills from soldering to rebuilding and building drives just to have a decent running engine.Of course Athearn develop a new drive that was at that time consider to be one of the best made-next to Hobbytown of Boston-which of course you had to build from a kit.Now,surprisingly brass steamers ran far better then brass diesels.[:0] Now,if you wanted a particular locomotive and couldn’t afford brass then you built that engine out of brass stock or in some cases tin stock…BTW even the old AHM steam locomotives wasn’t to bad for their time.
Atlas,Atlas/Kato,Kato and most other major brands base their drives on the Athearn drive…But,like I said with improvements…This was mention in the MR locomotive roundup article…Also compare drives and you will see the same basic design.Nothing new here Don…Just takes close observation of the design of the drives…
Athearn develop a drive in that is still in use today by every major manufacturer.
Even though this drive has been improved by other companies including Kato.Of course Athearn bashers will never admit todays smooth running drives design was first design and made by Athearn…The old Atlas locomotives didn’t look any better then Athearn’s.Life Like was a toy.What’s a Kato? A Japanese company that made trains for their domestic market.
No athearn hasn’t done anything to help the hobby along in the days of wooden and metal car kits…Atlas made track and imported N scale.Brass diesel locomotives was worst then Athearn locomotives.You want coffee grinders? Buy the old brass of the 50s and 60s.Funny how many claim to be long time hobbyist forget things wasn’t anything like today…Old timers disease I suppose?? Faded memories?? Or wasn’t around in the bad old days even though they claimed to have been?
Guys,let me tell you straight up…We are spoiled rotten today.How many of todays hot shot modelers can build a Penn-Line,Hobbytown of Boston or Varney locomotive kit?? Shoot,some stumble,trip and fall building a simple Athearn car kit…Some whiners apparently can’t even add a simple aftermarket detail part or else they wouldn’t waste time whining about a locomotive missing a simple detail part on some forum and then dare call their selves modelers and self proclaim experts and look down on others.[}:)]
No,the old days was harsh,lean and mean.You had to have many skills from soldering to rebuilding and building drives just to have a decent running engine.Of course Athearn develop a new drive that was at that time consider to be one of the best made-next to Hobbytown of Boston-which of course you had to build from a kit.Now,surprisingly brass steamers ran far better then brass diesels.[:0] Now,if you wanted a particular locomotive and couldn’t afford brass then you built that engine out of brass stock or in some cases tin stock…BTW eve
Did Athearn announce these were being discontinued, or are they simply waiting for when the next “batch” is to be produced.
Someone told me Athearn has tightened up their production numbers so as not to create large amounts of overstock for the deep-discount houses.
I never feared to disassemble, clean and reassemble an Athearn mechanism. (One may fairly ask why such activities were needed on a new mechanism, but that’s another story.) I am extremely leery of even looking under the shell of a Kato. (But the Katos I look at are N scale.)
Don, would you be kind enough to explain the boldened abbreviations? Thanks.
I didn’t think that this was going to stir up the bucket. Good responses though. [swg]
I was just lamenting that the locomotives that I mentioned are currently not being produced and wondered if other modelers here were in the same boat as me in which there were specific Athearns they wanted that at one time were plentiful, and now are hard to find…unless you go to swap meets or Ebay.[8)]
And of course, as soon as you buy one of these Athearn BlueBox units, it immedietely requires “tweaking” to get them ready for DCC. And if you plan on installing sound, you have to perform even more “tweaking” to quiet that “growl”. But this is a part of the hobby, anyway and does provide the opportunity to advance model working skills.[;)][:p]
Big_Boy_4005, thanks for the info about model production being in “spurts”. That did happen back then, but the times between the “spurts” were shorter. It’s understandable though that with today’s hard charging competition Athearn’s focus is primarily in it’s RTR and Genesis lines. After looking at shots of that new SD45T-2, looks like Athearn is “Raising the Bar” as Don Gibson mentions about IM. If most of you don’t consider this as raising the bar, at least Athearn is making a hard effort and succeeding at keeping up. [8D]
Cheers!
Dan,Never fear…The N scale drives is also base on the old Athearn HO drive.Same basic design…Listen my friend if you can work on a Athearn drive then you can work on any drive because of that basic design…
I truly don’t think Uncle Irv knew what he had in that drive when it was first design nor it would revolve into todays quality drives made by other manufacturers base on that very simple design.
If I had a nickel for every item (and not just in model railroading) that was once plentiful and cheap, but is now rare, and if found, expensive, I’d be running the Chicago and… er, I mean Union Pacific from a skyscraper in downtown Chicago!
I’m with you Alton! However, on the positive side of this situation I got the units I wanted off of Ebay for some very reasonable prices. I recently won an Athearn SCL U33B “New in the box” for $26 (plus $5 for shipping). No complaints from me! [:D][8D]
The four FP45s I’ve also gotten from Ebay, except for one, averaged $30+ dollars. All I wanted were two, but in a case where I was bidding on one unit, the seller threw in a free new Santa Fe FP45 shell! Total price: $32! [;)]
I’m particularly excited about the “Cowl” units as they have plenty of room for the installation of DCC sound. I will be spending money on Mashima motors and NWSL wheels in addition to the DCC equipment, but for my enjoyment, I don’t mind paying the extra for “doing it right”. [:)][:D][8D][8)]
Ever since Athearn acquired Rail Power Products I have been waiting to see how long it will take for some of the Blue Box engine to cease to exist. Especially the “wide bodies”. RPP made some great looking scale width shells in its day, and in greater variety than Athearn did.
It would be nice if this turned out to be the dawn of a rejuvinated Athearn Blue box line, with improved and correct shells. The new Athearn CF-7 is a prime example of what IS possible!
That would be cool, guy but the only catch might be (which many modelers could live with ) is that it would likely have the wrong “horn sound” as BLI does the “one horn” fits the entire model line.
I’d rather go the “Soundtraxx” route. Wi***hey’d hurry up with the Tsunami decoder!
As far as cheap goes, I just got an Athearn Baldwin S12 for $15, an Athearn U33C for $23, an Athearn U30B for $17, all Santa Fe, and an Athearn U28B Norfolk and Western for $14, all from the same company (all new) plus $6 shipping. Thats $75 for 4 Athearn engines delivered. They may not be as great as Atlas or P2K, but well worth the money.
I was talking with the owner of A-Line/PPW not too long ago. When Athearn acquired RPP he bought pretty much the remaining stock of shells and is selling them from his website. They were interested in the molds which are probably in China after a bit of re-tooling. Already we’ve seen the CF7 (as you pointed out, and with updated fans from the original RPP shell) and GP60 from the RPP lines and now a GP35. There stands to reason that more maybe in the works. Just pick from the RPP line…C30-7, SD40, and hopefully…a GP40X. That one would be great, as it apparently has a fairly big appeal. A-Line is out of the shells and when there’s one on EBay, it fetches a premium.
It is fairly common knowledge here that I am a big Athearn fan. Most of my loco roster is Blue Box, though I have detailed, painted and remotored a few of them. I look at them as raw material to work with, because I gain a great deal of my hobby enjoyment from building the model. Plus on my budget, if I’m going to pay $80-100 for a “RTR” loco, I don’t want to have to do a thing.
I looks like Athearn is producing F7s currently. They told me that they will be producing GP7s (formerly mislabeled GP9) in the fall. No SD40T-2s scheduled as of now.
I asked Athearn via mail about the Blue Boxes - I asked in the first line for cars - last week and got an answer one day later.
This is a brandnew official Athearn answer about the Blue Boxes:
Thank-you for taking the time to send in your inquiry regarding our regular “Blue Box” product line. Please note that we have no intentions to discontinue producing our regular line “Blue Box” items. We continue to produce these items on a daily basis here at our plant and will continue to do so as long there is a sufficient demand for those products. Please also note that we cannot produce all of the products that we catalog all of the time so we “batch produce” our products. Consequently all of our products are not always readily available.
huh… interesting response from athearn… nothing we didnt already know… but its alwasy reassureing to see them say the blue boxes will still be around.
and as long as they are around i will keep on buying them. i love athearns kits. they are like half the locomotives i have and like 60% to 70% of the rolling stock i have. (the rest being mostaly roundhouse). their engines are the niceset to work on ever. they are so simple yet work so well. once you know how an athearn gose together you can figure out jsut about anything else, cuase they are all basitly copys of athearns. mind there are some changes in say an atlas or a kato, when you break it down they all fallow the athearn design.
someone earlyer was saying that they would love to see better blue box kits i.e. railpower shells, and no more fatsos… i think this would be awesome. the fatsos bug me a bit but i can handel them, but i would always love to see some of their clasics with scale width hoods =)
im kinda going all over the place here… geuss im jsut reminicing too =P
well take care all.