I thought I read someplace that the Digitrax decoders shut off the BEMF when in a consist. Is this true or is there a setting I should adjust for better consist operation.
Look in the Digitrax decoder manual, starting on page 58. The CV57 that control the intensity of back-EMF has 2 values in each one. The low 4 bits are the value used when running individually, and the upper 4 bits are the value when in consist. A lower value for when in a consist makes sense, because otherwise the two locos will fight one another.
–Randy
Thanks Randy but I have been to the Digitrax website many times and must be missing the link to the decoder manual. Can you give me some help here.
Many Thanks.
Digitrax home page → Manuals and Instructions (at the top of the page) → Download the Manuals! (…click here.) → Digitrax Decoder Manual. That will bring you here: http://www.digitrax.com/ftp/decodermanual.pdf
HTH,
Steve