Do you think that this loco will work on 24" radius?
I would hope so. I run a similar model (Mehano (IHC) 2-10-2) on 18" radius without a problem.
It should. I have other Bachmanns running on a slightly tighter turn too. Just watch the tender. I think it’s a bit longer than other Bmanns too.
To answer the thread title: do sometmes, but it frequently hurts and gets me in trouble.
Yes, the 4-8-4’s will take 24" thus the 2-10-4’s should.
What about your turnouts? I don’t think I’d try to run that on #4’s or snap switches.
Haven’t tried, havent had a place for it. It did take the Bachmann EZ track switches fine, but those are I think bigger than a 4
well do yall mean turn out on the switches or just run over, cause it;ll just be running over it.
My 2-10-2 takes Bachmann #4’s just fine.
Sometimes I try not to but I usually fail. Sorry … I just couldn’t resist.
I have suggested before that you select a subject line that reflects what you are interested in talking about. I think I explained that it wastes the time of people who don’t have an answer to your question. Since you’re still doing this, I’m going to assume you don’t mind wasting people’s time. And since I don’t care to waste mine, I’ll cease reading your posts.
Ed
quote user="Been Nothing Since Frisco (BNSF)
Probabably. Depends more on the curved part of your Switches.
Ask the Bachmann!
It’s going to look really funny if it can do it.
NMot so bad as you may think.
I have LL track and turnouts but the loco won’t be truning on it just going strait.
[(-D]