Being new to this, Could someone tell me how to make a siding come off of an O84 curve with fastrack. I just need to know what I need. Thankyou so much for any help I can get.
Welcome
You may want to post this question on the Classic Toy Trains Forums at the top of the page. They are strictly O and S Gage. Some one there who frequents the forum can answer you better than the HO and N guys can.
Pete
What you need is called a switch and most hobby shops have them in stock. or you can contack the like of www.charlesro.com www.trainworld.com also try this first http://www.shop.mapajunction.com/category.sc?categoryId=214
marty is a good guy and will help you thru it his main page is www.mapajunction.com
Welcome Debbie.
Lionel hasn’t produced an 084 turnout, yet. Without trying to use different turnout brands with the required adapters, etc., I suggest replacing one of the straight sections at the entrance of the curve with an 072 turnout, however if you have the turnout going to the outside and want it to curve back to follow the original track you will need at least one half straight attached to the turnout curve. This will help the engines and rolling stock transition into & out of a “S” curve that this will create. If you are running some of the large full scale loco’s and 21" cars you mite even need to add a full straight to lengthen the “S” curve.
Hopefully I don’t have you completely confused.
If you need some clarification just holler.
Don’t be a stranger. Also, what is your general local because there are forum members here from all over the country who might be able to help.
Welcome 2bunnies. Nice to have a lady around here for a change. [#welcome]
Drop in on the Coffee Pot and chat with the forum guys.
Thank You ChiefEagle. I will do that, would like to chat trains with the guys. Kinda new to this forum stuff.