I thought what better way to spend a Saturday afternoon than take a ride over to my LHS. But first I had to find one since I have not been in many years after being out of the hobby. Check the internet, found a place that kept coming up in searches. Called ahead to make sure they had HO scale unitrack because I wanted to see it up close and in person. They have it, great, jump in the truck and drive the half hour drive to the store.
Enter the store in great anticipation and walk straight to the track (which was mostly Kato N scale and bachmann EZ-track HO scale). But then I do see the Kato HO scale track: a few switches and a few curved tracks. My eyes rapidly scan the wall of track and the floor where boxes of starter track sit. I look for a Kato HO scale Unitrack Starter Kit. No luck. I ask the store proprietor if he carries the Starter Kit. “No, is his reply. Kato has a HO scale Unitrack Starter Kit?” He inquisitively asks me. “Yes” I disappointingly inform him. “They even have a small layout set too” I add.
Before my trip is a total loss I figure maybe I can finally get my DCC system. I ask the proprietor if he carries the Digitrax Zephyr DCC system. “Yeah, he replies, I believe I have it in N scale over there” and he points down the aisle. In N scale I think , what’s he talking about? Immediately I reiterate to the store owner that I am talking about the DCC control system. He was talking about a train. Oh boy, I thought, this can’t be real. I do not think he even knows what DCC is. I immediately drop the subject.
OK, don’t panic. Maybe I can at least take a look at some of the new locos I only see in MR. “Where are your HO scale locomotives?” I ask the owner. “I only have a few, he replies. What I have is in the counter over there.” Then he adds, “I guess HO scale is sort of coming back.” To which I astonishingly remarked, “I never knew it left.” and he laughed. I didn’t even bother to look at the paltry selection. There was a wide variety of O
I don’t have a hobby shop around where I live so I order most of my stuff on the internet. If I’m out of town and there is a good hobby shop in that area, I’ll stop in and purchase a car or two.
There was a nice little hobby shop a few miles from my house that sat right next to the CSX main out of Holland MI. It wan’t a very large shop by any means but it was still a place I could go to look at stuff I’ll never be able to afford. They even had a working HO layout! But then after being open about 5 months it was turned into a art supply store! [:(!] Boy was I mad. Well, at least I know were to get paint and weathering supplies. [sigh]
I went to my LHS today, too. I brought along my “camera car” with the small video camera in the nose. Gerry, the owner, and I played with it for about an hour, running it around his fully landscaped in-store layout. We even made a video. The other customers that drifted in enjoyed it, too.
This time, I just bought a few LEDs for lighting up passenger cars, and a copy of MR to read on the plane on Monday. But it’s nice to know there are still good LHS’s like Maine Trains around.
Yea, I’ve got 'em. My favorite LHS closed last year. The owner relocated to care for his elderly parents. I never knew how good I had it.
There is a big, famous store not far from work, but everything is at full MSRP. I stop in now and then to browse but hardly buy anything. Too much $$$.
Big time blues. We used to have a great train LHS, Az Trains. No train HS within 150 miles, now. There are 2 Hobbytowns, but they are RC oriented, it seems. Certainly not trains. I can’t see supporting a layout with on-line shopping only. I can’t test a locomotive before buying (Spectrum!), and have to buy virtually every little nit and bit on-line. With all that model railroading demands, it seems like more of a pain than it’s worth. On-line is great, but not a panacea for me.
Yeah it’s a sign of the times. Everyone jumps on the internet looking for bargains. The poor old LHS is left out in the cold.
Happens to me too (in hydraulics parts - not trains). All the smarties try to bypass us to go direct to the manufacturer to get cheap prices. Then they come to me to buy their most urgent needs. If I don’t have stock they complain. But why should I have stock if no one is going to buy it?
When I lived in Houston, I could visit at least five hobby shops that were model railroading. Roadnames from east to west were available. I even knew the owners of a couple of shops personally. Prices ranged from 10% - 30% below retail, and I could just “put something in the back” until I could pay for it.
Now I live in Amarillo - two hobby shops in which model railroading is perhaps 25% of their business, MSRP on what little stock they have, and everything’s AT&SF. Not to blame them, but I never appreciated how good I had it in Houston…
Surfstud31, sorry to here of sucha poor experience but unfortunately this is common. Some guys just don’t get it. I have gone into shops thinking they would have a good selection based on advertisements but when I get in there they are clueless. A good aspect of this is they don’t always know what they have, meaning I went into a craft/hobby shop and they had Southern Pacific stuff galore. This is very unusual. So I talked him down on a large purchase and left quite happy.
So keep looking because when you find that one or two shops that give good service you will also meet others with the same values concerning your hobby.
I’m sure this is going to turn into another brick vs internet hobby shop thread… I’ll toss out my [2c] now and then duck… I’d say you left the best hobby shop when you turned off your computer and got into your truck. There use to be a solid dozen within 1 hour of where I live and I use to hit all of them regularly. One by one though, they’ve disappeared for one reason or another (owners die off or retire, can’t or won’t compete with the internet, lack of interest in hands on hobbies, etc). Only a few left and I don’t need anything bad enough to get into my car, deal with the morons and buttheads on the road, to make the trek. It just isn’t worth it to me anymore.
Jeff, I agree. I have ordered a bit off the net but I have found a couple shops I enjoy. I recently hit a shop that started to increase its N-scale inventory and I was able to meet the owner, about 90 yrs old. By the time I left the shop I was invited to run two layouts and they< the shop, would get anything I needed. This is the kind of stuff thats sooooo hard to find. I will tell you the shop is Trainquest in Moreno Valley and I will go back when I need/whant something or just chit chat.
Reckon you’re right about the best shop being in the computer. I know I was bemoaning people bypassing the LHS by using the internet, but guess how I do most of my shopping? It is a fact of life these days, like it or not.
When I go home for a holiday I try to drop in to the stores that I shop from. Yes, they are actual stores that also sell over the net. Perhaps in the States they no longer have a walk in department?
Poking round a shop is almost as good as running trains. Can be an expensive pass time though.[:I] Taking the wife along can limit the damage, but severely limits the fun too. Sorry dear.[:X]
I’m not saying that good shops aren’t out there. The few that remain here could probably be considered good as well. At least most of them can. They close for different reasons and part of my point was that it isn’t just the internet (which is what I know a lot of people blame the decline of the brick and mortar shops on). This past January I visited what many would consider a hole in the wall place and it’s the ONLY one in this area that didn’t require a 60 minute drive to get to (for me) and was sometimes worth going to. This place had been open for about 10 or 11 years and only dealt in trains. The guy that worked there was an ex railroad engineer (don’t know why he no longer was) so he Knew trains. He was a large scale guy so his interest in our tiny HO and N scale trains was a bit limited but he still knew what was available. Had an operating display layout as well as a private O scale layout in a back room. To walk into this place you had to step over the store mascot cat “Chessie”. Anyway, the Owner, had apparently lost interest in the train store some years back and basically let the place go to the dumper. Stock, from year to year after that was virtually unchanged. They would get some new release walthers stuff in from time to time but that was about it. Typically, my trips there were planned as part of some other reason for getting on the road (other than going to work) and I’d go to buy a magazine or something like that. Anyway, when I went in January, I was greeted by a sign on the door that said, GOING OUT OF BUSINESS. 20% off everything, 40% off in February, Closed March 1st. I was somewhat saddened by this because it was one of the few I enjoyed going to. I happen to think, that in that area, being the only one, this guy could have made a strong go of it if he’d shown some interest in doing business in model trains. Now all that’s left that doesn’t require a 90 minute plus turnaround on the freeways, is part of a local chain that IMO, has sucked for the last 7 or so years. They doubled the si
LHS in Columbus, Ohio is very good–pretty good variety in HO. As I haven’t even started my benchwork yet, have only bought some MR books from them. Price could be an issue–their prices are a little below Walthers MRSP, but not a lot, so my future dilemma will be how much can I afford to support the LHS, which I otherwise would like to do.
If you think about the costs involved of doing bussiness. I would imagine having a shop in an industrial area, mainly a warehouse, would be lower rent. Also if they are not open to the public they dont have to worry about theft so much. A store front with fair foot traffic must be expensive so I don’t mind shopping on the net, as it keeps prices lower in my opinion. If you stick to a fairly high standard on what you buy you should not have too many problems with returns and such. Some online shops will give free shipping if you spend x amount so look around or give them a call.
simon1966, can you share teh name and location? I drive home to Omaha (to visit my wife!) from Tennessee and pass right thru there. Plus she’s a big Cardinal’s fan so I visit the area at 2 other times each year.
Spidge - there was a LHS I used to insure (I’m an insurance agent) that was in a warehouse just like you said. Was lower rent, less chance of theft, etc. I’m pretty sure he’s still around but the store is about an hour away and he carries mostly structures.
I have to agree with many of you that the internet is the best store for me at this point. I like to patronize the small business (as I am one) and I love to just drive down the street and pickup what I need but that just isn’t possible for me. It really is a shame - I was ready to spend hundreds of dollars for DCC, track, and engine, etc at this man’s store but now it looks like the internet vendors will get my money.
I have even considered opening a shop myself since my area is so desperate for a decent LHS. But I would have to leave my own business and a rather comfortable salary. That would be interesting.
I might try again today to check out another store if I can get up the nerve. If not, I will make my purchases on the internet. Either way, I’ll post my results.