lionel 6264 flat car for forklift

Classic Toy Trains Forum
1

Just picked up a 6264 flat car missing the timber.

Anyone have this car? Need the dimensions of the timber to mill some up so it looks right.

Thanks

Tom

2

You could check this site then mesure your car and cut the 12 timbers to fit.

http://www.tandem-associates.com/lionel/lionel_trains_6264_flat_car.htm

3

Have you checked parts dealers such as Olsen Toy Trains or The Train Tender? Lots of others out there too - I just don’t remember their names at the moment.

Good luck.

4

My original timbers are approximately 7/32 inch square (just under 1/4 inch) and 3-1/2 inches long. I wanted to have some fun on a holiday layout, and I wanted the forklift to unload from the car some 5/16 inch diameter candy canes that I had cut. The forklift as built would not hold them, so I cut out a piece of metal from a tin can top, put a little curve in it, and clipped it to the original black metal piece on the end of the forklift. The grandkids have a great time unloading the candy canes!