Looking For Yellow "Dot" Decals ....

Model Railroader General Discussion (Model Railroader)
1

No … not Department of Transportation or wheel inspection dots. [swg]

I need a bunch of 1/8" solid yellow dots for a project. Does anyone know of a decal set that would contain these ?

Mark.

2

How about yellow trim film and a 1/8 inch diameter paper punch?

http://www.microscale.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=TF-6&Store_Code=MD&search=trim+film&offset=&filter_cat=&PowerSearch_Begin_Only=&sort=&range_low=&range_high=

3

Maybe you could try some yellow trim film and punch your own using a fine gasket punch or paper punch?

http://www.amazon.com/Fiskars-Inch-Circle-Punch-23517097J/dp/B0001DT3ZE

Ed

4

Thought I already suggested that [(-D]

5

If I could learn to type with TWO fingers I would have been three minutes earlier! [sigh]

Ed

6

I got eight fingers and two ‘‘tums’’…but they don’t move the way they used to and sometimes they stick together…like in ‘‘cramp’’. LOL

Have some fun! Google ‘‘dot decals’’.

Take Care! [:D]

Frank

7

Do they have to be decals? Could 1/8" adhesive dots work? You can get these at Staples or other office supply stores.

If decals are what you need, you might have to order a special printing. Highball Graphics will to a 1/4 sheet. You can provide the artwork or have them do it for an extra charge.

http://www.mgdecals.com/Sorry.htm

8

Thanks guys. My first hurdle is the fact I don’t have yellow trim film and second, I don’t have an 1/8" punch.

That being said it gave me some direction, and a guy at work says he has a 1/8" puch I could use and I found some yellow decal stripes that are a 1/4" wide that I could punch them out of. Will give that a try - as long as I can get a good clean punch.

Mark.

9

Herald King Decals offered the yellow wheel inspection dot decals, set W-1

Chris M