Join the discussion on the following article:
Modeler’s spotlight video for July 30, 2009 – Inside Cody’s office
Another nice episode of Cody’s Office and the comment at the end about it being filmed in front of an HO Scale plastic audience was
really funny. Thanks for the episode, Cody, and keep up the good
work.
Great episode Cody! I realy like the idea of the Kadee screw graber. Neat invention. I can’t wait to see articles on the project N scale layout. I always wait for the joke at the end. The joke this episode was great. I always like Cody’s Office.
Cody, welcome back! Hope you enjoyed your vacation. I was wondering if on your locomotive reviews if you could provide information on the minimum radius needed. Not everyone is able to run the large turbines and articulated steamers after all. Of course, the larger the curve, the better but what about those of us who can not go easily beyond a 4x8?
I like the HO scale audience bit! Good to have some light humor nowadays.
It took a few viewings to warm up to the Cody’s Office segments, but I have come to look forward to them: crisp, efficient, no-wasted time, practical, congenial, knowledgeable, and a nice touch of restrained humor–including the “outtakes” after closing credits. The opening titles and music offer an attractive intro to each segment. All nicely done!
Very nice job Cody & Dave. When you explained the connection on the beer line you said the tie at the joint was a piece of printed curcuit board? Maybe I didn’t hear that correctly or could you explain? Why not use just a scrap cut out tie?
Thanks for another enjoyable show. I always look forward to checking out Cody’s office. It certainly makes getting through a crazy Thursday a lot more bearable!
Jeff B
Great episode cody.
Which handheld DCC system is Dana using on the product review videos?
Dear Cody,
As I write this, I am just south of you in Springfield Ill. I hope I will be able to visit you, if I can convince my mother to spare the time to visit Wisconsin. The excuse of “the cheese there is really good”, is wearing out. My trip across the country is going nicely. So far, I have been to Steamtown National Historic Site, Horseshoe Curve, and The Altoona Memorial Railroad Museum, not to mention the fact that I have seen Right of Way from the UP, BNSF, CSX, and NS. I will do what I can to go to Wisconsin, but if I don’t do it this trip, I will go to the National Convention. Anyway, I have not had the chance to comment on the past few episodes, and I just wanted to say good job. Keep up the good work. JHG IV.
H-O plastic audience… must be why a lot of pastors enjoy model railroading. It’s those plastic people! Imagine… no complaints, no hospital visits, no counseling, just “perfect Prieser people!”
Another geat show. I always learn something from each installment.
I too enjoy the wacky endings. Can’t wait till next Thur.
Hi Cody,
I am modeling the timesaver layout in ho with a spur for an engine shed. this measures 18inches by 6 ft. Would you have ideas for industries to use? This will be part of a modular layout that I am planning and am trying different techniques to see what works best. Any comments would be appreciated. thanks
HI Cody,
Will you be having more 4x8 ft layouts coming up in future articles of model Railroader. I am just getting back in the hobby and I enjoy your scenery and modeling tips. Is there a favorite track plan that you like?
Can we say, Here’s a Emmy Award for Cody Grivno!!!
Enjoyable session…wish we could have had a little more detail on the Athearn turbine with regard to decoder and speaker installs. I’m facing this job in the very near future and need all the help I can get!
Cody’s video stopped during his showing of the Volvo loader! The video would go no further!!! What’s up with that??
Ah, how refreshed we feel after vacation, then back to work. Another great show and episode as always. I have the Turbine on layaway at my local hobby supply. Cannot wait to get it home on my layout. To connect layout sections together, you can use dowel pins as well, and an eletrical plug, like a small jack style for your power. Maybe some small shims to adjust your section together, for smooth operation, and leeling. Happy rairoading to all.
Very enjoyable show! Why are the blinds drawn in your office? Long night before? I have used the grabbers for along time, would not be without them. I also have a pair of 30" to pick up dropped parts when working at the bench. Keep up the good work!
Again an enjoyable watch. The wacky comments at the end always put a smile on my face.
The Kadee screw picker-upper is nothing new. I got one of those in a kit used for computer repair many years ago. The grabber was used to pick up loose screws inside of computer cases and to start screws in computer assembly of motherboards to the cases. I admit I never thot of using it to assemble freight cars - its a good idea.