Hi
I have finaly decided what the next indoor HO project will be a small
layout with a One horse town and even the horse is booked on the next train out.
To do this I need some plans for a tiny or microscopic full faciaties depot
a small miners type house for the station master a tiny false front store and ditto saloon as I intend to scratch build the whole town which is as listed
I also need to know where I can get an old time looking 0-4-0 or 0-6-0
steam locomotive in HO scale
any help apreciated
regards John
hi John,
for most where to get : ???
you can try www.walthers.com :
http://www.walthers.com/exec/productinfo/160-51124
or for a nice selection of fine quality scenery try
http://www.valleymodeltrains.com/index.html
You may want to check out Roundhouse as they make “old time” engines and rolling stock.
Regards
Try Alpine Division Scale Models they have several old western type buildings that would fit your needs. They even have a couple of sets, one with a Blacksmith, Saloon, General Store in it, another with a Rooming House and Livery Stable with Corral, yet another with a Gazette Building, Barber Shop, Mortuary, and Doctors, and finally one with three different hosues in it.
Jay
You and others that are interested in Alpine may want to know that their URL is:
http://www.alpinemodels.com
It’s an easier way to track any new developments than waiting for the next Walthers catalogue. IIRC, those kits were first produced by Ayres Scale Models, then E. Suydam & Company, before Alpine bought out Suydam.
Bob
NMRA Life 0543
Hi
thanks
What can you tell me about the modelpower 0-4-0 and the lifelike coffee pot
are they any good.
As town is so small I wanted to scratch build it if possable so some help
finding drawing of suitable structures would be handy.
I have a series of Plan Sets by Al Armitage, which were publshed by Kemtron Corporation many years ago. There is no date on them, and I’m sure they are long out of print. They are probably what you are looking for.
Plan book 1is Railroad Structures, 2 through 4 Old West Buildings, 5 JS Cain House, 6 Sacramenro Dwekings and 7 Brick Dwekings and 8 Churches.
Al wrote a lot of articles and drew a lot of plans on subjects ranging from buildings of all types, locomotives and cars, automobiles and trucks, etc. A search of his name in the Index of magazines resulted in a 12 page list from 1938 to 2003.
Al was a pioneer in and strong advocate of using styrene plastic in modeling.
Hi DScmitt
Do you have access to a scanner?
What I am looking for are all small structures a station with passanger and freight facileties
a house a false front store and saloon
tiny tending toward microscopic is a better description.
The idea is that for what ever reason town didn’t come up to expectations.
Even the local one horse has had enough and is leaving with or without
his owner, I supose I had better add a church to the list so the residents of boot hill
had a propper burial
regards John
John:
If you have access to a good LHS (Local Hobby Shop) likely they have a “dead pile” of back issue train magazines for sale. The going price is 25 or 50 cents per issue. The 1950s and 1960s issues of Model Railroader and Railroad Model Craftsman usually had scale drawings of smallish structures which would fit your needs. I can’t be more specific not knowing your structural “taste”. Don’t shy away from combining or designing your own structures. Sounds like a fun undertaking.
Randy
John,
Hit the library, find books with pictures of old western towns, especially ones that dried up. then using anything in them as a refeence (a personj, car, wagon, ect), make a royugh guess on size and then just make your own plans and build from that.
The Library may have books with plans already, so you might find some there too. but just to let you know, most of the structures you want are already made, you could just kitbahem to fit your needs (probably a much simpler approach than scratch building). Talk to your LHS, i’m sure they can point you in the righ direction for what you need to kitbao what you want.
Jay
Al Armitage’s plan books are still available. Precision Scale Company carries them. Although Precision Scale doesn’t have a Web site, the plan books are listed on page 998 of the Walther’s 2004 HO catalogue or they can be ordered directly from Precision. Although they would not be scratch built, another possibility might be the Reese Street Row House kit and No Problem Joe’s from Grandt Line Products:
http://www.grandtline.com
And, possibly, you might find something you like in the Cut and Assemble card stock HO models offered by
Dover Publications:
http://store.doverpublications.com
You could use them as plans, or assemble them and see if they fit the space you have available prior to scratch building.
Bob
NMRA Life 0543
Hi all
Local hobby shop does 603km away count as local ? most of my buying is done by phone
I tried producing drawings from pictures a couple of times oh boy did I get it wrong…
Not being famiier with the real wild west not the John Wayne version makes things a bit awkward.
could hit the town library next weekend with a bit of luck
and see what I can turn up.
Not really sure what I am looking for have the funny feeling those old westerns
romanticised things just a bit .
note too self remember small and don’t want those kits
The big problem will I think be finding small enough structures on which to base the models.
apart from the whole layout is only going to be 6X4 total with not a great deal of room for town I really
think small buildings will help the not quite made it feel I want to achieve.
I hope at least some of this drivle has some coherent thoughts in it.
that can turn into reality.
any way must stop thinking out loud so to speak
regards John
John…
603 km to the nearest shop…? Where are you located?!?
Here are a couple of links to a lot of plans and drawings of small buildings that might help you out…
http://www.ag.ndsu.nodak.edu/abeng/plans/
http://memory.loc.gov/ammem/hhhtml/hhhome.html
Hope that helps with your project.
I would second that recommendation for Roundhouse engines. I am overhauling a 2-6-0, and the kit came with a bunch of extra parts so you can make it anything from a ~1880s to 1930s loco.
Andrew
Most “one horse towns” were in the middle of nowhere, and not necessarily just out west. Here in Illinois, the middle part of the state was full of nothing towns with rail service. Here’s what most of them looked like:
Mainline running through the middle of town. In fact, the town exists because the rails were laid first, and the town grew up around it (mostly because the line was close to someone’s house, who decided to exploit the closeness of the trains by starting up a local general store).
Passing siding also running through town. As long as we need a passing siding, why not put it where a town is? It will also double as a runaround track for local switching moves.
Depot near the middle of the passing track, on the mainline side of the right of way. Nothing fancy, just a 9’x18’ wood building without much in the way of decorative trim. Most railroads had “standard plans” to cover these basic depots (remember, STATION is a place, DEPOT is a building)
In the midwest, one grain elevator. Generally wood originally, and covered with corrugated tin sometime around WWI. The grain elevator track (through track usually, not a stub) would double as a team track, which would service the local coal dealer, lumberyard, or anyone else who wanted freight delivered to town. Generally, NO ramp or crane.
Bigger one horse towns would have stock pens, big enough to handle 2-3 36’ stock cars.
Yet bigger one horse towns would have a second elevator, either on the same track as the first, or on their own through track somewhere in town.
Even if a town did have all these elements (main, passing, depot, two elevator tracks, one team track, and a stock track) it could have a permanent population of no more than 100 people or so. 100 people generally works out to 10-15 houses within a mile or so of the depot. I drive through three such towns every day on my way to work!
How stuck are you on scratchbuilding? Woodland Scenics does a whole line of cast-metal and wood structures that are absolutely ideal for what you’re planning–an assortment of tiny false-front stores that are less than 3x3 or 2x2 inches in size. Check them out at http://www.woodlandscenics.com/ and look under Figures & Scenes/Scenic Details. They are generally pretty cheap ($10-15 each, some kits have two buildings), nicely detailed, and just the right size to make a town of a dozen or so buildings without taking up much real estate on a 4x6 layout.
Take a look at your local library and see if they have any books on model railroading, or real railroading–you might find books with plans for model railroad structures there. Other places to look would be older books about architecture–rather than trying to make plans from photos, use actual building plans! If there are any such buildings near where you live, take a look at them (bring a camera and a notebook) to get ideas on how to build them.
Can only second the reference to Walthers. They have a website. Small stations are available in some of the lower-cost craftsman kits. Alpine, Classic Minitures, etc. I have CM’s “red light” district, and though “craftsman”, they are very easy to construct, and can give you good training on “scratchbuilding”. For locomotives and cars, check out Riversosi’s little wood-burning Americans. I have several, and you CAN install decoders into them. Dont’s forget a water tower. I have IHC’s RR water tank, and also Life-like’s homestead group. even the Atlas shanty can be painted and weatherd to simulate the “boondocks”. Walthers index even lists several liverly stables and stockpens, barns, etc. good luck with your little “old west” town!
Photos in my family album indicates to me that the J. Wane sets wern’t too far off. Just rember: dirt, mud, and dust.
Hi
As far as scratch building goes I am the worst stuck I can be I dont have any plans to work from
I have done a little with varying sucsess before and a little bashing of kits.
So I dont have a layout like so many others about the place.
Some one mentioned a water tower I had not forgoten that that was going to iether a kit or RTR just so the first structure went in quick.
Hi all
Oops that got away before I had finished.
I live in Kalgoorlie West Australia
The wild west is what I had in mind as it is such a complete change from anything I have done before.
I have bits of the series of articals on the Jerome and South Western RR when I saw that WOW!! thats
what I need to do some thing completly different no or little green the wild west thats it no more
English country sides and towns just dust tumble weeds.
The Roundhouse loco sounds too big for 6X4?? but thier short wagons and coaches seem ideal
saw a couple of references to G&D sets of cars are they still avalable or where they a limited edition thing.
I have heard of the Late John Allen and His G&D RR
regards John
I lived in a one horse town but the horse died.[:D]
There are many small towns that had rail service that fit the one horse town mold. In farm country many towns had few comercial buildings. Some times just the General Store and farm supply, but shipped enough product to get a station and a siding.
Some towns came into being just because the railroad placed a siding there and installed an operator. I have seen towns that you wonder why they exist at all. So just pick a era and start looking for stuctures tha will fit your idea of a one horse town and add a sideing and a combination passenger freight station and you should get the effect you want.
Hi all
A couple of last questions before heading up to the hardware shop for 2" x 2" Aluminium angle and 2’’ x 1" timber
there are three books I want to get by Klambach
one on building the Jerome and South Western, one on small layouts and the HO beginers guide
Can any one give me the correct titles for the books.
If I am going to build a US layout better look at the way things are done in the US and learn the correct terms
It has become obviouse in this exchange of Ideas that often we are speaking different railway languages too
express some of the same ideas? (Err I think)
and a beginers book never goes amiss.
Given that it will be a Wild West layout would I be going over the bounds of sanity and reason,
too put injuns in them thar hills or is that best left out on grounds of too toy like and to much risk of
geting it wrong.
Thanks for all the links and thoughts having had a bit of a look round I wonder
why other than for personal pleasure why i would need too scratch build the prices or fairly
resonable for the small buildings I am looking for love the woodland scenics station “sorry” depot.
But what is the signal for?? seems odd right in the middle rather than one end.or the other.
regards John