Power districts for model train layouts with Digital Command Control

Comments MRR
1

Join the discussion on the following article:

Power districts for model train layouts with Digital Command Control

2

Good Information, thanks!

3

As a first time user to MR forums, this is excellent info. All my purchasing has to be online and although I understand the concept of power districts, finding the exact equipment is sometimes difficult. Thanks.

4

Found information which is helpful me as my knowledge of wiring is very limited

5

This is exactly the information I’ve been looking for, very well explained. Thanks!

6

great article which greatly simplifies block wiring, thanks

7

I would use a double pole single throw track power switch to isolate both rails when making repairs. I would connect the green LED across the switched power leads to the rails to indicate when the track has power.

8

This is a great article very helpful for me!!

9

Now I know where the smoke is coming from!! Excellent article!

10

Great stuff!! It would be great if all these articles were in PDF files so they can easily be stored for later use.

11

i am ready to start wiring my railroad. perfect timing for the article, it is the info. that i need. great article great magazine

12

I concur on desiability of having articles in PDF format.
I have modeling articles on my NOOK reader

13

I agree, I wish everything was in PDF

14

I AM JUST STARTING TO WIRE MY LAYOUT WHICH HAS FOUR 10 FT DISTRICTS AND THE ARTICLE EXPLAINS WHAT I WANT TO KNOW PERFECT .THANK YOU RAYMOND CONNOLE