Not sure how to start out but I’ll go with Batman’s request for a wreck.
The results of a trip to the floor.
Show me another wrecked or damaged loco or rolling stock.
My Floor model .
SD9 346 looked at lot like Allan’s wreck after its trip to the floor.
Below is after the repairs. The step still has some damage, but I operate the SD9 anyhow.
Please show another floor model.
“One Tough Dude.”
This loco took an elbow to the mid section popping out a couple of fans and loosening some railing.
Lets see some more “floor models”
Bob
This one took a tumble due to the over exuberance of a show patron, The Bear was not a happy camper and took a long time to get up the nerve to attempt the repair. The biggest task was removing the broken tender drawbar, a fair bit had to be dismantled for access; Walthers went “beyond the call” by supplying a new drawbar at no cost.
Back together and somewhat surprisingly it ran first time! [:O]
How about the first day at home. No not the fleabags, my new DCC system!
Show me something you took a photo of before you even got it to the layout.[:)]
I took a lot of pictures of this when I got it(wanted proof of how nice it was,in case I really screwed up the paint job).
Show me a project of yours…before,after,or during.
Mike
The Boothbay Railway Village 3D printed HOn30 boxcab, right out of the box
The Bull Ant drive, ready to install
Complete and ready to run
Show me more before, during and after
Before:
During: (Scalecoat I [tup])
And After (but still needs glazing)
FYI, Neat PRR photos of these cars;
http://www.billspennsyphotos.com/apps/photos/album?albumid=11158055
Show Me Another Project You Are Working On.
CSX Geometry car “Georgia”. Custom decals and sides cut from styrene.
Let’s see more projects you are working on.
My current project is a new observation car with a full interior.
More projects you are working on.
Mel
Modeling the early to mid 1950s SP in HO scale since 1951
My Model Railroad
http://melvineperry.blogspot.com/
Bakersfield<
I could have put a photo of the entire layout but I choosed this one: a wooden loading dock for aDPM structure.
More projects you are working on please.
More than 24 hours and no reply. So it is time to change the request.
Show me a “Ten wheeler”.
A Pennsy H10 awaits her turn at the coal dock…
Show me an articulated steam locomotive.
My only articulated steam loco on the layout is Mantua 2-6-6-2 lettered for similar CB&Q 2-6-6-2’s which operated on the Deadwood branch line in southwestern North Dakota.
Please show a steam powered freight train.
MEC 524 at the head of a freight on my layout
Show me another freight with steam power.
You got it!!!
My old 2-6-6-2 pulling a long string of box cars up a 2% grade on the SLOW.
Show me steam pulling passenger cars.
Steam with a passenger train [:D]
My Bachmann 2-8-0 with upgraded decoder, keep alive and LED lights!
Show me more passenger trains!
Charles
Charles said, “Show me more passenger trains!”
More passenger trains, please.
Here is a passenger train, but one you might not think I have.
Show me something unexpected.
I sure didn’t expect to see Santa Claus with two helpers on the back platform of a private car at the tail end of an Amtrak train! In August!
Show me two trains passing…