Well today was a good to to hit the open roads and do some fanning…We didn’t know where to go or what area was hot so we texted a CN conductor and he said to go and check out Byron Hill today and that the UPGBC train should be coming up…So we packed our gear and away we went…On the way down we heard some chatter on the scanner but we didn’t wanna stop to see what train that was…We wanted to see if we can meet up with the coal train bound for Green Bay…As we got closer we heard some more chatter…This time it sounds like the UPGBC train…We figure we should stop right by Quad Graphics and see if we can meet this train…
We got off the highway and went down by Quad Graphics and seen a CN switcher switching out the warehouse…We then headed down to the next road where we saw another CN train but this time it was a ballast train dumping ballast down a spur track but as soon as we got there…Boom…Here comes the UPGBC train…I took the shot right with the CN ballast train
As the train slowly rolled on by we then went back to the other crossing by Quad Graphics where the switcher was switching out the plant and shot these…Boy was he picking up speed now
As he past the plant we then raced him to a siding near by and when we got there we were in for a real treat…It was a meet with a CN grain train…As the conductor walks out from the cab and in the clear of the coal train he is ready to do a roll by inspection
[URL=http://imageshack.us][IMG]http://