Well after seeing Manco’s idea!!
http://www.mylargescale.com/Community/Forums/tabid/56/aff/9/aft/112269/afv/topic/Default.aspx
I went to Lowes and got the supplies!
I used the glue by the Manufacture of the pvc parts.
I also used brads as pins so bridge stays together!
I screwed some pieces together…
So, I still have to paint it.
I’ll paint it red primer.
Bridge is just under 6’ and is stronge enough.
Sean
Man that is a nice bridge! What kind of wood did you use? - Peter
Ok what’s next some hi iorn building , You are becomming the Bridge Master.
Dave
He said “pvs” but I think the bridge is “pvc” plastic.
Please more details!
Regards, Greg
[oops] PVC
So I’m out in this deluge washing the PVC bridge ( Wife thinks I’m nuts) so it can dry, before I paint it!
As I was hosing it down, I noticed that I forgot some thing!! 
Water leter outers!! Duhhh!!!
As you look @ the sides, the chanel points up!
Also each upright forms a pocket!
So A drilling I go!
Rewashed and hosed it , and low and behold water is not colecting!!
So the bridge is sitting next to the furnace to dry!
Sean
I just folowed this lead!
http://www.mylargescale.com/Community/Forums/tabid/56/aff/9/aft/112269/afv/topic/Default.aspx
Sean
Ahh those pesky little “lessons learned” are more informative than a full set of plans.
[tup][tup][tup][tup][tup][bow]