Smaller Train Shows

Posters have created thread topics on some of the larger train shows like Amherst, but I thought to create a topic for smaller train shows that don’t rate their own thread. So anyone may post here about any of the other lesser know shows.

Someone else has started a similar topic in Classic Toy Trains, as train shows usually have both scale and hi-rail.

A smaller train show that I recently attended was the Mid-Michigan Train Show in Mt. Pleasant last Sunday March 24. It was their first show since the pandemic. It was in a smaller conference center than their last show, and there was no room for layouts.

I guess I already have filled out my roster so I did not buy any rolling stock, but I did need to start populating my On30 layout with structures.

1 Like

I went to the Great Train Show in Sacramento last January. It wasn’t as good as in the past but I picked up a couple of goodies. I did get to meet Scott Inman of splives.org. That was nice but he said that the show was about one eighth the size it was before covid.

MC, Oroville, CA

Last weekend, I attended the annual model train show in Ottawa, organized by the good folks at OVAR. Many of the vendors are real model railroaders clearing out their stuff or just thinning the herd. Prices are very reasonable for older stock, like they should be - and also for newer stock. My kind of show! I scored on HOn3 rolling stock and some older locos. Got home and I realized that one of the locos had a dead decoder. I swaped it out - no problem given the low cost of the loco.

I look forward to next year’s show already!

Simon

One factor is, what makes a train show “smaller?” Size of floor plan, or diversity of stuff being offered? A buddy of mine is a train show dealer and he has learned that many train show customers are really just locomotive buyers, and thus some train shows are mostly just locomotive dealers. I rarely buy a loco at a train show any more. Structures, detail parts, and certain books and railroadiana such as maps are more my thing.

A smaller local show where I know what to expect to find might be uninteresting to me now but a smaller show away from where I live might have more things of interest. So I live near Milwaukee but go to relatively few local shows; I have seen most of the inventory. But the smaller shows in Galesburg IL, Rockford IL, Davenport IA, Green Bay WI seem fresh and new to my eyes. I will give an example. Local shows – everyone is looking for the same Milwaukee Road and C&NW stuff so do not expect deals. But you might find C&NW almost being given away in Galesburg or Davenport. Conversely if you are looking for Rock Island stuff, the local shows are the Mohave Desert but Davenport IA, oh my!

Obviously the major manufacturers tend to go to the biggest shows where their new product announcements will make the biggest splash. Some “smaller” shows do feature more local or “basememt” manufacturers, such as the recent profusion of 3D printer based manufacturers. That to me is a draw because they tend not to advertise much or be placed in local hobby shops or the Walthers catalog. But many smaller shows do not even feature basement manufacturers.

Some “smaller” shows feature regional brick and mortar train dealers selling new stuff, perhaps at a discount, but not all smaller shows feature actual retail dealers selling new stuff. One reason I like local dealers at distant train shows is that “new”

1 Like

May 3 & 4

Cumberland, Maryland Fairgrounds

Maryland & West Vriginia Model Railway Association

Give a shout-out to the Greenberg train and toy show:https://www.trainshow.com/ They make a circuit at places; lucky they’re in Chanitilly, VA twice/year. A lot of great vendors without being too overwhelming.

I like the smaller, local shows now. I’m not building much, so my shopping list is minimal and I’m just looking for ideas and entertainment. Cost is low, driving time is short. What’s not to like? We don’t have a lot of shops in Delaware, so shows provide an outlet.

Hello All,

There are three (3) annual train shows I can attend from where I live.

Each are approximately 2-hours drive-time- -one way.

The premiere show is at the Denver National Western Stock Show Complex.

Another is in Estes Park.

While the “smallest” but not the least is in Colorado Springs.

“She Who Must Be Obeyed” allows me one foray to a single event.

I’ve enjoyed the “smaller” more community-orientated shows.

Because of my given limitations, I’ll save my pennies for the larger show.

Full Disclosure:
I have seen many of the same vendors at both the smaller and larger gatherings. I try to support them at the larger show.

Hope this helps.

When I started this thread, I intended the tern “small” to be interpreted liberally. The only big train shows topics that I have seen recently are Amherst and that show in Milwaukee. I was told that the show in York, PA was bigger than Amherst, but I don’t recall hearing about in this forum. If you don’t think a show is big enough for you to start its own thread, please post it here.

Duplicate

If you mean the York, Pa. show, I believe that is a TCA show and you either have to be a TCA member or a guest of one. And you can go as a guest only once.

And I think it’s mostly large scale.

I believe the Train Collector’s Association is aimed at collectors of toy trains, so is mostly Lionel - American Flyer, not large scale (which usually refers to No.1 gauge, which is also sometimes called “G gauge” - like LGB trains.)

SIGH!!! Okay, I guess I should have said “larger scale”.

“Large Scale” means trains that are 1:32 scale or larger (1:29, 1:22.5, 1:20.3), generally using No.1 gauge (1.75") track.

O scale/gauge is not large scale…or larger scale. [;)]

Double sigh. Okay, how about scales generally larger than HO?

Also:

About the Northeast Large Scale Train Show

The Amherst Railway Society presents the Northeast Large Scale Train Show. The event occupies 55,000 square feet in the Young building on the Eastern States Exposition fairgrounds. The show covers all facets of large scale railroading - model railroads, railroad art and photography, railroad history and preservation, tourist railroads, railroad artifacts, and railroad books and videos. The Amherst Railway Society defines :“Large Scale” as any of the following: S-scale, O-scale, G-scale, F-scale, 7.25 gauge, 7.5 gauge (1.5" to the foot) and larger.

Here’s the shows I’m aware of in the Nashville TN area. Please feel free to add any I’ve missed and any info relating to the other areas of the State – Memphis/West TN and Knoxville/East TN.

Coming up soon:

April 24th - Train Show, April and November, Tennessee Central Ry Museum & Hobby Store, 220 Willow Rd. Nashville, TN, www.tcry.org.

July 20th - Madison Train Show, July, City Road Chapel, Madison, TN, nathanbaker@comcast.net 615-612-3324

Aug 10th - Train Show, August 26, 2023, The sHOw Model Train Club, Bowling Green, KY, kcomer300@yahoo.com, About 90 minutes north of Nashville. The official Corvette Museum is also nearby.

Others:

TCA (Train Collectors Assn.), July, Volunteer State Community College, 1480 Nashville Pike, Gallatin, TN, 615-646-2232, petrone.v@comcast.net

Crossville Model RR Club/SE Region NMRA, Annual Train Expo in October, Cumberland Community Complex, Crossvilletrains@gmail.com, About 2 hours east of Nashville.

Jim

Oops!

It depends on what building at the show. The dealer hall is open to the public so anyone can come. The member halls which is the vast majority of the show require the membership.

While you are mostly correct that the show is aimed at O and S Scales you can still find plenty of HO, N, and other scales there too. I model HO and always come away from the show with something and crazy good deals especially from the member halls either liquidating their HO/N collection to get out of the hobby or to move on to O. Works out for me everytime.

Like I said above, there are still plenty of HO and N equipment there to make the trip worth it even if you aren’t an O or S scale modeler. I always find deals and walk away with something there so the yearly membership is worth it to me. The online only membership is $40 a year (cheaper than the standard membership with less paperwork involved that I don’t need) while still retaining full member benefits.

I missed that the first time through the website ad. But what do they mean by “dealers”?

I did try to see what/who the dealers were, but that link on the website didn’t seem to take me anyplace.